Battery, Disconnecting And Connecting: Connecting

Pay attention to the following when connecting the Battery -A- :

-- Disconnect the connector -2- from the Battery Monitoring Control Module -J367- -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the battery ground cable terminal clamp by hand on the battery negative terminal "-".

-- Tighten the nut -1-.

-- Reconnect the connector -2- to the Battery Monitoring Control Module -J367- -3-.

-- Turn on the ignition.

-- Check time and adjust if necessary.

-- Window, open and close all the way.

-- Then, with the windows closed, pull the power window switch until the relay audibly switches.

-- Check the convenience switching for the window regulators.

While comfort switching is operated, window must close without holding the power window switch.