Battery, Disconnecting And Connecting: Connecting

Pay attention to the following when disconnecting the Battery -A-.

-- Release and disconnect the connector -2- from the Battery Monitoring Control Module -J367- -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the battery ground cable terminal clamp by hand on the battery negative terminal "-".

-- Tighten the nut -1- to the tightening specification.

-- Reconnect the connector -2- to the Battery Monitoring Control Module -J367-.

-- Turn on the ignition.

-- Check the time and if necessary adjust.

-- Window, open and close all the way.

-- Then, with the windows closed, pull the power window switch until the relay audibly switches.

-- Check the window regulator convenience switch.

While comfort switching is operated, window must close without holding the power window switch.