Engine Speed Sensor -G28-: Installing
WARNING: This page is about a different car, the 2016 Volkswagen CC, 2015 Volkswagen CC, 2014 Volkswagen CC, 2013 Volkswagen CC, and 2012 Volkswagen CC. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal. Note the following:
- Replace the seal.
- Lightly coat the seal with clean engine oil
- Tighten the bolt -2- to specification: 8 Nm.
- Do not tilt the engine speed sensor -1- when installing otherwise it may get damaged.
-- Install the noise insulation, refer to DESCRIPTION AND OPERATION .