LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2017 >> Beetle S, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 67 (Wiper/Washer Systems (1 Of 2)) >> 92 Wiper/Washer Systems >> Windshield Wiper System >> Rain/Light Recognition Sensor, Removing And Installing >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rain/Light Recognition Sensor, Removing And Installing: Notes

WARNING: This page is about a different variant/trim than selected.

The Rain/Light Recognition Sensor -G397- can be installed again if it is not damaged when removing it from the retaining plate on the windshield (for example when replacing the windshield). If the windshield is cracked in the area near the Rain/Light Recognition Sensor -G397-, then the Rain/Light Recognition Sensor -G397- cannot be used again.

Store the removed Rain/Light Recognition Sensor -G397- in a dust-free area and keep the silicone connecting pads from getting dirty.

The Rain/Light Recognition Sensor -G397- cannot be optionally installed. Refer to the Parts information for the correct Rain/Light Recognition Sensor -G397-.

scientia non olet · About LEMON Manuals