Engine, Supporting In Installation Position: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- :T40093/4 (quantity 2) from the :T40093A
- :T40093/5 (quantity 2) from the :T40093A
- :T40091/1 (quantity 2) from the :T40091
- :T40091/2 (quantity 1) from the :T40091
- :T40091/3 (quantity 2) from the :T40091
- :T40091/1 (quantity 1) from the :10-222A
- :10-222A/11 (quantity 2) or :10-222A10 from the :10-222A
- :10-222A/31A-1 (quantity 1)
- :10-222A/31A-2 (quantity 1)
- :10-222A/20
- :10-222A/28-2 , quantity: 2
- Quantity: 2 :10-222A/28-1
- :VAG1331
Tool Development
-- If the adapter for :10-222A does not have the indicated holes -arrow- shown they must be added.
- Dimension -a- = 225 mm.
- Hole diameter = 12.5 mm