Engine, Securing On Engine And Transmission Holder: Procedure

WARNING: This page is about a different variant/trim than selected.

The transmission is separated from the engine. Refer to ENGINE AND TRANSMISSION, SEPARATING .

-- Unlock the retaining tab in direction of -arrow- and remove the engine cover mount -1-.

Fig 1: Identifying Engine Cover Mount

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip the mount -1- for the right engine cover -2- from the bore.

Fig 2: Identifying Engine Cover Mount And Locating Bore

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Hook the :2024A to the engine and to the :VAS6100 .

Fig 3: Engine Lifted

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

To be aligned to the center of gravity of the engine assembly, the hole rails of the lifting hook must be inserted as shown in the illustration.

-- Lower the engine from the :VAG1383A using the :VAS6100 .

-- Secure the transmission side of the engine to the :VAS6095 as illustrated.

Fig 4: Identifying Engine And Transmission Holder

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.