LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2017 >> Beetle R-Line SEL >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition/Glow Plug System [CPLA,CPPA,CPKA,CPRA] >> 28 Ignition/Glow Plug System >> Ignition System >> Knock Sensor 1 -G61-, REMOVING AND INSTALLING >> Removing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor 1 -G61-, REMOVING AND INSTALLING: Removing

-- Disconnect the connector -2- from Knock Sensor 1 -G61-.

Fig 1: Locating Connectors
GWWA24-11095Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the coolant pump with thermostat. Refer to COOLANT THERMOSTAT HOUSING, REMOVING AND INSTALLING .

NOTE:

The Knock Sensor 1 -G61- is located below the intake manifold behind the coolant pump.

-- Remove the Knock Sensor 1 -G61- -arrow-.

Fig 2: Locating Knock Sensor Bolt
GWWA28-10028Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.