Condenser, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal and note the following:

-- Coat the new O-rings with refrigerant oil before installing .

Vehicles with Refrigerant R134a

-- Fill the refrigerant circuit. Refer to REFRIGERANT, FILLING IN A/C Service Station .

-- Start the A/C system after charging. Refer to A/C SYSTEM, OPERATING AFTER CHARGING .

Vehicles with Refrigerant R1234yf

-- Charge the refrigerant circuit. Refer to the appropriate service information .

-- Start the A/C system after charging. Refer to the appropriate service information .