Spark Plugs, Replacing, 2.0L TSI Engine: Removing

-- Remove the engine cover. Refer to ENGINE COVER "Upper", REMOVING AND INSTALLING .

-- Disengage the connectors -1- through -4- and at the same time remove all of the plugs from the ignition coils with the power output stage.

Fig 1: Disconnecting Ignition Coils Connectors

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- for the ignition coil with power output stage.

Fig 2: Identifying Ignition Coil Stage Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the Puller:T10530  all the way into the ignition coil hole -1-.

Fig 3: Identifying Puller T10530

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the knurled nut -2- in the direction of the -arrow-.

-- Pull the ignition coil on the Puller:T10530  in the direction of the -arrow- out of the cylinder head cover.

Fig 4: Identifying Puller T10530

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Repeat the procedure for all ignition coils with power output stage.

-- Remove the spark plugs using the Spark Plug Removal Tool:3122 B  .