Intake Manifold: Disassembly

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the throttle body. < Ref. to REMOVAL , Throttle Body. >
Remove the purge control solenoid valve. < Ref. to REMOVAL , Purge Control Solenoid Valve. >
Remove the manifold absolute pressure sensor. < Ref. to REMOVAL , Manifold Absolute Pressure Sensor. >
Remove the EGR pipe.

Fig 1: Locating Purge Control Solenoid Valve Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel delivery pipes.
NOTE: Disconnect the quick connector as shown in the illustration.

Fig 2: Disconnecting Quick Connector
Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Locating Fuel Delivery Pipe
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel pipe and cap.

Fig 4: Locating Fuel Pipe And Cap
Courtesy of SUBARU OF AMERICA, INC.