Information Electronics Control Module 1 -J794-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert the two clips from the Radio Removal Tool T10057 into the slots on the Information Electronics Control Module 1 -J794- until they engage. Points on the grip eyelets of tool face outward.
Fig 1: Insert Two Clips From T10057 Into Slots On Information Electronics Control Module Until They Engage
-- Remove the Information Electronics Control Module 1 -J794- from the installation frame.
-- Remove the Radio Removal Tool T10057 by pushing the locking tabs on Information Electronics Control Module 1 -J794-.
-- Disconnect all the connectors on the Information Electronics Control Module 1 -J794-.
-- Insert the Fiber-Optic Repair Set - Connector Protective CapsVAS6223/9 -1- onto the MOST Bus connector -2-.