Fuel Level Sensor -G- CONNECTOR ASSIGNMENT

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the 5-pin connector from the fuel tank connection flange. Refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .

Assignment of the 5-pin connector at Fuel Level Sensor -G-.

Fig 1: Connecting Multimeter Between Terminal Of Harness Connector For Voltage Measurement

Courtesy of AUDI OF AMERICA, LLC

Transfer Fuel Pump -G6- switched positive
Wire connection from Fuel Level Sensor -G- to instrument cluster (sensor ground) - Pin 5
Wire connection from Fuel Level Sensor -G- to instrument cluster (fuel gauge) - Pin 7
Wire connection from Fuel Level Sensor -G- to instrument cluster (fuel gauge) - Pin 6
Transfer Fuel Pump -G- ground

NOTE:

For vehicles with a FSI- and TFSI engine, the pins -2, 3 and 4- are looped through the Fuel Pump Control Module -J538-.