Thermal Management Control Module -J1024-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi e-tron Quattro and 2019 Audi e-tron Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Switch off the ignition.
-- Release and disconnect the connector -D-.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Remove the bolts -A- and remove the Thermal Management Control Module -J1024- -C- with the bracket.
-- Loosen the catch -arrows- and remove the Thermal Management Control Module -J1024- -C- from the bracket -B-.