Control Module Bracket Version 1:

WARNING: This page is about a different car, the 2018 Audi A8 Quattro, 2017 Audi A8 Quattro, 2016 Audi A8 Quattro, and 2015 Audi A8 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Bracket -1- & Pin -2-

Courtesy of AUDI OF AMERICA, LLC

-- Press pin -2- out of the clip -arrow A- of the bracket -1- in the direction of the seat cushion using, for example, an upholstery needle.

-- Remove the pin that was pressed out from the seat pan.

-- Remove the support foot -2- from the upper frame of seat pan -1-, unclipping clip -arrow A- at the upper seat frame.

-- Detach retaining tabs -arrow B- on both sides.

-- Carefully remove bracket from the seat pan in direction of -arrow-.

Fig 2: Bracket -2-

Courtesy of AUDI OF AMERICA, LLC