Engine Speed Sensor -G28-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the Engine Speed Sensor -G28- connector -arrow-.

Fig 1: Identifying Engine Speed Sensor Harness Connector -Arrow-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the noise insulation. Refer to NOISE INSULATION .

-- Remove the Engine Speed Sensor - G28- cable downward through the opening in the oil filter housing -arrow-.

Fig 2: Identifying Opening In Oil Filter Housing -Arrow-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove retaining bolts -A-.

Fig 3: Identifying Bolt -A-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the Engine Speed Sensor -G28- downward.