Front Axle Speed Sensor, Removing And Installing: Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Before inserting the speed sensor, clean the inner surface of the hole and coat the speed sensor all-round with Polycarbamide Grease:G 052 142 A2 .
-- Insert the speed sensor into the hole in the wheel bearing housing and tighten the bolt to 8 Nm.
-- Connect the speed sensor to speed sensor wiring.