Body Control Module B (BCMB): Removal

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

NOTE: This step is only necessary if the BCMB is being replaced.

Using a diagnostic scan tool, begin the PMI process for the BCMB following the on-screen instructions.
Remove the retainers and lower panel.

Courtesy of FORD MOTOR COMPANY
Remove the nuts, disconnect the electrical connectors and remove the BCMB.

Courtesy of FORD MOTOR COMPANY