Real-Time Diagnosis

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Select {Current Data Display & Save} in << Engine Diagnosis >> display screen.
Make sure that normal display is shown when operated as follows:
- Depress and release the brake pedal. (Stop light switch and brake switch are turned ON.)
- Turn the main switch to ON.
- Turn the "CANCEL" switch to ON.
- Turn the "SET/COAST" switch to ON.
- Turn the "RESUME/ACCEL" switch to ON.
- Depress or release the clutch pedal.
- Place the shift lever in any position other than neutral.
  NOTE:
  - For details concerning the operation procedure, refer to the PC application help for Subaru Select Monitor.
  - For detailed concerning cancel code, refer to the "List of Cancel Codes". < Ref. to LIST OF CANCEL CODE . >