Engine Speed Sensor -G28-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Remove the bolt -arrow- from the right coolant pipe on the transmission.

Courtesy of AUDI OF AMERICA, LLC

-- Remove bolts -arrows- and move the ATF cooler slightly to the side.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Ignore -item 1-.

-- Disconnect the connector -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and the Engine Speed Sensor -G28-.