LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2016 >> e-Golf SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 1005 (Anti-Lock Brake System (Abs) And Stability Control) >> Removal And Installation >> Wheel Speed Sensor - Front >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    Remove the wheel and tire. For additional information, refer to Wheels and Tires .

  1. 2.

    Disconnect the wheel speed sensor electrical connector.

  1. 3.

    Remove the wheel speed sensor harness bolt and detach the retainers.
    • To install, tighten to 12 Nm (106 lb-in).

  1. 4.

    NOTE: Do not allow the caliper to hang from the brake hose or damage to the hose can result.

    Remove the 2 caliper anchor bolts and position the caliper, pads and anchor plate aside.

    • Support the caliper with mechanic's wire.
    • To install, tighten to 250 Nm (184 lb-ft).

  1. 5.

    Remove the brake disc.

  1. 6.

    Remove the front wheel speed sensor bolt and the sensor.
    • To install, tighten to 18 Nm (159 lb-in).

  1. 7.

    To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals