Information Electronics Control Module 1 -J794-, REMOVING AND INSTALLING: Removing
-- Turn off the ignition and all electrical consumers and remove the ignition key.
-- Open the glove compartment.
-- Remove any data storage device still in the Information Electronics Control Module 1 - J794-.
-- Insert the two clips from the Radio Removal Tool:T10057 into the slits in the Information Electronics Control Module 1 - J794- -1- until they lock into place.
The points on grip eyes must face outward.
-- Remove the Information Electronics Control Module 1 - J794- -1- from the glove compartment at the Radio Removal Tool: T10057 grip eyes.
-- Release and disconnect the connectors from the Information Electronics Control Module 1 - J794- -1-.
Equipment Levels with the Digital Sound System Control Module -J525-
-- Insert the Fiber-Optic Repair Set - Connector Protective Caps:VAS6223/9 -1- onto the MOST bus connector -2-.
All Equipment Levels
-- Press the locking tabs on the Information Electronics Control Module 1 - J794- and remove the Radio Removal Tool:T10057 .