3.3 Adaptive Cruise Control, Calibrating

Conditions 

• The Distance Regulation Control Module - J428- must be calibrated during the following conditions:
  • Distance Regulation Control Module - J428- was removed and installed or replaced.
  • Bumping into the Distance Regulation Control Module - J428- when carelessly assembling the front bumper cover.
  • Damage to the front bumper cover through an accident or similar.
  • The front bumper carrier was remove and installed or replaced.
  • Rear Axle Toe will be adjusted.
  NOTE:

  • To great of a horizontal adjustment of the Distance Regulation Control Module - J428- causes the function of the ACC/Front Assist to stay switched off. This adjustment be shown through the following message in the Instrument Cluster - KX2-:
  • Restricted sensor view from a dirty sensor or inclement weather conditions for example, heavy rain, snowfall, iced over sensor etc. creates a temporary unavailability of the ACC/Front Assist functions. This can show through the following message in the Instrument Cluster - KX2-:
• Adaptive cruise control calibrating. Refer to Suspension, Wheels, Steering (Adaptive Cruise Control (ACC); Adaptive Cruise Control (ACC), Calibrating).