ATF, Filling

-- Install the Oil Filler - Adapter 2: VAS6262/2  hand tight, with the engine >>running<<.

Fig 1: Identifying Oil Filling Adapter VAS 6262/2 Installed

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Shake before opening.

-- Read the information regarding the bleeder pipe before attaching the Oil Filler: VAS6262A  to the fluid container. Refer to ATF LEVEL, CHECKING AND FILLING - Shorten the bleed pipe on the: VAS6262A as follows: .

-- Fill 1.0 liters (1.05 quarts) of ATF.

-- Remove the Oil Filler: VAS6262A  at the quick-release coupling and check it.

If ATF Flows Out of Adapter Hole

ATF does not need to be topped off.

-- Allow ATF to drain until it drips.

-- Fasten ATF check plug with new seal to 16 Nm. The ATF level test is now completed.

If ATF Does Not Drip

-- Add another liter (1.05 quarts). Refer to ATF, FILLING .