Radio Code, Checking With Vehicle Diagnostic Tester
Requirement for the Vehicle Diagnostic Tester
- The Vehicle Diagnostic Tester is connected to the central data bank (Carport, Fazit) via the Central Partner Network (CPN).
- The existing access authorization for the "GeKo" system
The radio codes are also called security codes; they can be requested in the central database and shown on the Vehicle Diagnostic Tester display.
To activate the radio, the codes must be entered via the radio keys, as before RADIO AND RADIO NAVIGATION SYSTEM, ENTER PIN FOR ANTI-THEFT CODE AND ASSIGN SOME LOCAL RADIO STATIONS TO STATION BUTTONS .
Procedure
-- Connect the Vehicle Diagnostic Tester Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .
-- Switch on the ignition.
-- Touch button/field on screen: Guided Functions .
-- Press > button to confirm.
-- Select in succession:
- Brand
- Type
- Model year
- Engine code
-- Confirm vehicle identification.
-- Select in succession:
- "Radio system".
- "Request radio code".
-- Perform code request following the Guided Functions prompts.
-- End code request as follows:
-- Press the Go To button -arrow- on the display.
-- Press the End button on the display.
-- Press the Exit button in the exit menu.
-- Turn off the ignition and disconnect the diagnostic connector.