Instrument Cluster: Removing
-- Switch off the ignition and all electrical consumers and remove the ignition key.
It is not necessary to remove the steering wheel.
-- Pull the steering wheel all the way out and then lower as far down as it will go.
-- Loosen the steering column trim gap cover from the instrument panel, refer to Storage Compartments, Covers and Trim in Removal and Installation .
-- Remove the screws -arrows- from the instrument cluster.
The fixed electrical connection to the instrument cluster is disconnected automatically when the cluster is pulled out of the instrument panel opening. Harness connector is installed permanently in vehicle and is disconnected automatically when pulling out instrument cluster.
-- Remove the instrument cluster from the instrument panel.