Selector Lever Handle: Removing

-- Move the selector lever into the "D" position.

Handle with the Button on the Side

Fig 1: Handle With Button On Side

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pull the button out of the handle just far enough until there is a small gap between the handle and the button. The button locks when released.

-- Prevent the button from being pressed in with a cable tie or wire.

Handle with the Button in the Front

Fig 2: Handle With Button In Front

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

It is not necessary to pull out the button manually. The button locks in the installed position -arrow-. when the handle is removed.

Continuation for All

Fig 3: Disengaging Knob

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the cover.

-- Disconnect the connector from the selector cover.

-- Pull the sleeve upward and unlock the handle.

-- Remove the handle from the selector lever without pushing the button.