LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2016 >> Tiguan R-Line, AWD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> 2.0L - Lubrication - Engine Code: CCTA >> 17 Lubrication >> Specifications >> Fastener Tightening Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fastener Tightening Specifications

Component Fastener Size Nm
Oil baffle to upper oil pan bolt - 9
Oil cooler to accessory bracket bolt - 15
Oil drain plug to lower oil pan (1) - 30
Oil filter element to accessory bracket - 22
Oil pressure switch to accessory bracket - 20
Oil pump drive chain tensioner guide pin to cylinder block bolt - 9
Oil pump to upper oil pan bolt
  M6 9
M8 20
Oil suction pipe to oil pump bolt - 9
(1) Always replace.

Lower Oil Pan Bolt Tightening Sequence And Specification 

Fig 1: Identifying Lower Oil Pan Bolt Tightening Sequence
GWWA17-10270Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the bolts -1 through 20- in three steps as follows:

  1. Tighten the bolts hand tight
  2. Tighten the bolts to 8 Nm
  3. Tighten the bolts an additional 45° (1/8) turn

Upper Oil Pan Bolt Tightening Sequence And Specification 

Fig 2: Identifying Upper Oil Pan Bolt Tightening Sequence
GWWA17-10273Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the bolts -1 through 14- in three steps as follows:

  1. Tighten the bolts hand tight
  2. Tighten the bolts to 15 Nm
  3. Tighten the bolts an additional 90° (1/4) turn

Oil Separator Bolt Tightening Sequence and Specification 

Fig 3: Identifying Oil Separator Bolt Tightening Sequence
GWWA17-10423Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the bolts in sequence -1 through 9- to 9 Nm.