Vehicle Data Input
-- Enter the following data:
- License plate number
- Key number
- Vehicle Identification Number (VIN)
- Fuel type
- Odometer reading
The following vehicle data can be found in the certificate of registration part 1:
- License plate: "for example, WOB-HH 1234"
- Emissions key number. "Field 14.1 (Code for field 14)"
- Vehicle manufacturer: "Field 2,", "Field 2.1 (Code for field 2)"
- VIN: "Field E"
- Type and version "field D2 (type only)", "Field 2.2 (Code for field D.2)"
Emissions Test Specified Data Input
Specification data may be entered differently:
- 1. Manually
- 2. Via barcode input from emissions testing data sheet
- 3. through ELSA Web service
NOTE:
If there is no ESP for deactivating the engine speed limitation is available, the measurement of the speed regulation can also be performed using the speed limited by the control module. For this the emissions test specified data entry be done manually.
In order to be able to use ELSA web service, the Emissions Testing Station used for the emissions test must be integrated in the workshop network.
When using ELSA Web service, the vehicle specification data is automatically transferred via the network into the appropriate form.