Multifunction Transmission Range Switch -F125-, Installing

Install in reverse order of removal. Note the following:

-- Attach the lever -4- to the selector shaft -6-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the bolts -5- for the Multifunction Transmission Range Switch -F125- hand-tight.

-- Bend back the hooks on the lock washer -2-.

-- Mount the washer -3- on the selector shaft -6-.

-- Install the washer -2- with the hooks facing up.

-- Install the washer -2- with the long narrow guide into the long narrow depressions in the selector shaft -6-.

-- Tighten the nuts -1- to the tightening specification.

-- Tighten the nut -1- and secure it by bending the hook on the washer -2- upward.

-- Attach the gearshift lever -3- to the selector shaft -4-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- With the gearshift lever -3- shift the transmission into "N". This means pushing the gearshift lever -3- opposite the direction of travel all the way toward the rear.

-- Then move the gearshift lever -3- into "N". Push the gearshift lever -3- two positions forward in the direction of travel.

-- Mount the spring washer -2- and the nut -1- on the selector shaft -4-.

-- Tighten the nuts -1- to the tightening specification.

-- Adjust the selector lever cable. Refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING .

-- Check the selector mechanism. Refer to SELECTOR MECHANISM, CHECKING .

-- If removed, install the air filer housing.

• Gasoline engine. Refer to AIR FILTER (CNLA & CRJA) , or AIR FILTER (CZCA, CZDA & CZTA) , or AIR FILTER (CBPA & CKJA) , or AIR FILTER (CPLA, CPPA, CPKA & CPRA) .
• Diesel engine. Refer to AIR FILTER (CVCA, CUUA, CUUB, DELA, DEBA, DEJA, DGMA) .