Selector Lever Handle, Removing And Installing: Removing

-- Move the selector lever into "D".

Handle with the Button on the Side: 

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pull the button out of the handle just far enough until there is a small gap between the handle and the button. The button locks when released.

-- Prevent button from being pressed in with a cable tie or wire.

Handle with the Button in the Front: 

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

It is not necessary to pull out the button manually. The button locks in the installation position in direction of -arrow-. when the handle is removed.

Handle and Sleeve: 

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the cover.

-- Disconnect the connector from the selector cover.

-- Push the sleeve upward in direction of -arrow- to unlock the handle.

Handle and Clamp: 

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Cut the clamp under the boot -arrow- with a side cutter.

All Handles: 

-- Remove the handle from the selector lever without pushing the button.