April 5, 2026: LEMON Manuals is launched! Read the announcement.

ATF Cooler, Removing And Installing, Rectangular Version: Installing

Install in reverse order of removal. Note the following:

NOTE:

Replace the O-rings after disassembly.

-- Install the coolant hoses to the ATF cooler according the markings made during the removal.

-- Check the coolant level. Refer to COOLANT SYSTEM/COOLANT (CZCA, CZDA, CZTA) , or COOLANT SYSTEM/COOLANT (CBPA, CKJA) , or COOLANT SYSTEM/COOLANT (CNLA, CRJA) , or COOLING SYSTEM/COOLANT (CVCA, CUUA, CUUB, DELA, DEBA, DEJA, DGMA) , or COOLANT SYSTEM/COOLANT (CPLA, CPPA, CPKA, CPRA) .

-- Install the battery and the battery tray. Refer to BATTERY .

-- Check the ATF level. Refer to ATF .

-- Install the air filter housing. Refer to AIR FILTER (CNLA & CRJA) , or AIR FILTER (CZCA, CZDA & CZTA) , or AIR FILTER (CBPA & CKJA) , or AIR FILTER (CPLA, CPPA, CPKA & CPRA) .