LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2016 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance System (General Information) >> Maintenance >> Emissions Test >> Emissions Testing, Diesel Engines >> Manual Emissions Test Specified Data Input:
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Manual Emissions Test Specified Data Input:

NOTE:

All test requirements and data required for the emissions test can be found on Data sheets for exhaust emission test for the corresponding engine.

Input the values Wert 2500 ± 200 RPM in the speed regulation field on a non-deactivated engine speed limitation, and in the speed (RPM) for conditioning field 2500.

-- Follow the instructions on the display for manual data input.

GWWN01-10402Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Enter the indicated values on the emissions testing data sheet "test values for the emissions test" on the display in the following sequence:

  1. Speed for Conditioning
  2. Number of Throttle Bursts for Conditioning
  3. Engine Oil Temperature (Minimum Value)
  4. Select Method for Measuring Engine Oil Temperature
  5. Idle Speed
  6. Speed Regulation
  7. Speed Regulation Measured Time (1 second)
  8. Emissions Sticker Value. (See below)
  9. Select Sensor Type (Sensor Number)
  10. Select Measuring Mode
  11. Measurement Time Amount