Information Electronics Control Module 1 -J794-, Removing And Installing: Removing

-- OPEN THE GLOVE COMPARTMENT.

-- REMOVE ANY DATA STORAGE DEVICE STILL IN THE INFORMATION ELECTRONICS CONTROL MODULE 1 -J794-.

-- TURN OFF THE IGNITION AND ALL ELECTRICAL EQUIPMENT.

-- REMOVE THE IGNITION KEY, IF EQUIPPED.

-- INSERT THE TWO CLIPS FROM THE :T10057  INTO THE SLITS IN THE INFORMATION ELECTRONICS CONTROL MODULE 1 -J794- -1- UNTIL THEY LOCK INTO PLACE.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

THE POINTS ON GRIP EYES MUST FACE OUTWARD. 

-- REMOVE THE INFORMATION ELECTRONICS CONTROL MODULE 1 -J794- -1- FROM THE GLOVE COMPARTMENT AT THE :T10057  GRIP EYES.

-- RELEASE AND DISCONNECT THE CONNECTORS FROM THE INFORMATION ELECTRONICS CONTROL MODULE 1 -J794- -1-.

EQUIPMENT LEVELS WITH MOST BUS 

-- INSERT THE :VAS6223/9  -1- ONTO THE MOST BUS CONNECTOR -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

ALL EQUIPMENT LEVELS 

-- PRESS THE LOCKING TABS ON THE INFORMATION ELECTRONICS CONTROL MODULE 1 -J794- AND REMOVE THE :T10057  .