Rear Body Seam Sealing: Notes
Rear lid end piece seam sealing. Refer to REAR BODY SEAM SEALING .
Right side panel seam sealing, fuel filler tube. Refer to REAR BODY SEAM SEALING .
Left wheel housing seam sealing. Refer to REAR BODY SEAM SEALING .
Right wheel housing seam sealing. Refer to REAR BODY SEAM SEALING .
Inner wheel housing seam sealant all around. Refer to REAR BODY SEAM SEALING .
Rear lid interior view with spoiler plastic foot seam sealing. Refer to REAR BODY SEAM SEALING .
Rear lid interior view without spoiler plastic foot seam sealing. Refer to REAR BODY SEAM SEALING .
Rear lid exterior view seam seal. Refer to REAR BODY SEAM SEALING .
Underbody seam sealing. Refer to REAR BODY SEAM SEALING .
Underbody seam sealing, additionally multi-link suspension. Refer to REAR BODY SEAM SEALING .
Underbody seam sealing, additionally Torsion beam axle. Refer to REAR BODY SEAM SEALING .
Underbody seal sealing, additionally 4motion. Refer to REAR BODY SEAM SEALING .
When repairing, seam sealing is to be replicated according to its original conditions in appearance and layer thickness.
Sealing seams near attachments to be installed must be applied smoothly In order to avoid damage and malfunctions.
Water drain holes must remain free.
All threaded pins and weld nuts with M-threads, as well as all other pins and contact surfaces for the assembly must be functional after the sealant application.
The sealing material cannot be applied on blank but rather on filled surfaces.