Required Importer Notification

After installing the new components for the passenger occupant detection system (passenger occupant detection system pressure sensor / Passenger Occupant Detection System Control Module - J706-), attach the labels (only tear-off strips) for the new components on the " registration tag 2 for airbag systems". " Registration card 2 for airbag systems" should be sent to importer for registration.

The " registration card 2 for airbag systems" can be printed from the " Technical Service Handbook" :

ElsaWin 

→ Technical Service Handbook (HST)

→ Technical Service Bulletin (TSB)

→ Electrical system

→ Function

→ Passenger protection area

→ Turning off the airbag unit/child seat, installing a set, etc.

→ System 2

The " process ID" and " TPI number" for this procedure can be found in " Technical Service Handbook 2" : " 2022327/1"