Automatic Headlamp Control And Stationary Cornering Lamp, Checking Function
The automatic headlamp control is also called automatic headlamps.
- Vehicle must be in daylight.
-- Switch the ignition on.
-- Turn the light switch -4- to the "Auto" -2- position.
The Headlamp Should Not Come On When It Is Bright.
Rain/Light Recognition Sensor Is Located In Upper Center Area Of Front Windshield -Arrow-.
-- Switch the ignition on.
-- Turn the light switch -4- to the "Auto" -2- position.
-- Cover the rain/light recognition sensor -arrow- from the outside by hand or with a suitable object.
The Decrease In Light Is Measured And The Headlamps Are Switched On.
-- Turn the light switch -4- to the "0" position -1- and switch off the ignition.
Stationary Cornering Lamp
The Stationary Cornering Lamp Is Integrated In The Headlamp.
-- Start the engine.
-- Switch on the low beams or automatic headlamp control.
-- Turn on the turn signal.
-- Check the cornering lamp.
-- Repeat on the other side.