Infotainment System Display, Removing And Installing: Removing

-- Turn off the ignition and all electrical equipment.

-- Remove the ignition key, if equipped.

CAUTION:

Risk Of Damaging The Component Surfaces.

When positioning a prying tool, put commercially available adhesive tape over the component in the visible area.

-- Remove the Instrument Panel Center Trim (together with the center vent). Refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING .

-- Insert the :T10057 into the release slots -1- on the Front Information Display Control Head -J685-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the upper locking mechanisms -1- by pushing in direction of travel.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the lower locking mechanisms -1- by pushing in direction of travel.

-- Remove the Front Information Display Control Head -J685- -2-.

-- Release and disconnect the connectors.