This Build-Up Of Static Electricity Can Lead To Malfunctions When Contacting Electrical Components.
-- Touch a grounded object, before working on electrical equipment :VAS6613 . Do not touch directly on the connector terminals or the electrical components.
-- Place the ABS Hydraulic Unit -N55- with the ABS Control Module -J104- on the :VAS6613 .
-- Remove the three TORX® bolts from the ABS Control Module -J104- and set aside immediately (risk of confusing them with the new TORX® bolts).
-- Place the ABS Hydraulic Unit -N55- with the ABS Control Module -J104- upward on the :VAS6613 .
-- Remove the ABS Control Module -J104- from the ABS Hydraulic Unit -N55- without tilting it.
-- Cover ABS Control Module -J104- solenoid coils with a lint-free cloth.
-- Clean the ABS Hydraulic Unit -N55- sealing surface using mineral spirits and a lint-free cloth.
The ABS Hydraulic Unit -N55- sealing surface must not be worked with a file, metal scraper, sand paper or similar.
If the ABS Hydraulic Unit -N55- sealing surface is damaged (for example through grooves or scrapes) the ABS Hydraulic Unit -N55- must be replaced with the ABS Control Module -J104-.
The seal on the ABS Control Module -J104- must not be pulled out or raised up.
The seal on the ABS Control Module -J104- cannot be replaced.