Selector Lever Cable, Removing And Installing: Installing

• The selector mechanism selector lever is in the "N" position. The cable in the selector mechanism can only be locked in this position.

-- Guide the cable in the selector mechanism until it is visible through the locking mechanism in direction of -arrow-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Turn the locking mechanism 90° in the direction of -arrow- with a large screwdriver.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- The cable is correctly locked when the grooves on the locking mechanism are at a right angle to the cable.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install new clip -arrow- and replace the plugs.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert the selector lever cable -1- in the cable bracket -4- and install a new clip -5-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the selector lever cable carefully onto the selector lever.

If removed, install the cable bracket -4- with the bolts -arrows- on the transmission.

-- Engage the selector lever cable in the bracket -2- clip -3-.

-- Install the heat shield under the selector mechanism. Refer to FLOOR HEAT SHIELD, REMOVING AND INSTALLING .

-- Adjust the selector lever cable. Refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING .

-- Check the selector mechanism. Refer to SELECTOR MECHANISM, CHECKING .

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING [FOR ENGINE(S) CNSB, CNSA, CXBB, CXBA, CXCB, CXCA] .