Overview - Selector Mechanism

WARNING:

Move the selector lever into "P" and set the parking brake before working with the engine running.

Fig 1: Exploded View Of Selector Mechanism Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Handle with Shift Cover
- Do not remove the handle unnecessarily. Unclip only the cover for the emergency release. Refer to EMERGENCY RELEASE FROM P .
- Removing and installing. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
Selector Mechanism
- With integrated Selector Lever Sensor System Control Module -J587- with Selector Lever -E313-, Tiptronic Switch -F189-, Selector Lever Park Position Lock Switch -F319- and Shift Lock Solenoid -N110-.
- Do not grease the selector lever cable.
- Removing and installing. Refer to SELECTOR MECHANISM, REMOVING AND INSTALLING .
- Checking and Adjusting. Refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING .
Bolt
- 4 Nm
- For the selector mechanism to the selector housing
- Quantity: 4
Plugs
Hex Nut with Collar
- M6 - 8 Nm
- M8 - 20 Nm
- Quantity: 4
Selector Housing
Clip
- For the selector lever cable on the bracket
- Is secured to the ATF cooler
Transmission
Cable Bracket
- For the selector lever cable
- With installed grommet and spacer for the cable mounting bracket on the transmission
Bolt
- 13 Nm
- Selector lever cable adjusting bolt
Selector Lever Cable
- Removing and installing. Refer to SELECTOR LEVER CABLE, REMOVING AND INSTALLING .
Clamps
- Secures the selector lever cable on the cable bracket
- Replace after removing
Bolt
- 20 Nm
Clamps
- Replace after removing