ATF Level, Checking: Filling

-- Install the :VAS6262/2  hand-tight in the check hole when the engine is >>running<<.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Shake the fluid containers before opening.

-- Attach the :VAS6262A  to the fluid bottle. Pay attention to the instructions while doing so. Refer to ATF LEVEL, CHECKING .

-- Fill one liter of ATF.

-- Remove the :VAS6262A  at the quick-release coupling and check it.

If ATF Flows Out Of The Adapter Hole: 

ATF does not need to be topped off.

-- Allow the ATF to drain until it drips.

-- Install the ATF check plug with a new seal. The ATF level test is now completed.

If No ATF Drips Out Of The Hole: 

-- Add another liter. Refer to ATF LEVEL, CHECKING .