Oil, Filling
-- Clean the area around the oil filler plug -arrow- for the front axle differential lock.
-- Remove the oil filler plug -arrow-.
-- Remove the elbow piece from the :VAS6291 A .
-- Insert the hose -A- of the :VAS6291A into the oil fill hole -arrow-.
The oil temperature when checking the oil level is 20 °C to 40 °C (68 °F to 104 °F).
Pay attention to the temperature of the oil container when filling.
The oil temperature can be measured using the :VAS6519 .
Oil Capacity And Oil Specification. Refer to FRONT AXLE DIFFERENTIAL LOCK, CHANGING OIL .
-- With the valve -arrow- closed, screw the oil container -A- onto the :VAS6291A .
-- Open the valve -arrow- and hold the oil container above the oil fill hole level as shown.
-- Using the :VAS6291A , fill with oil until it flows out between the hose and the transmission housing.
-- Bring the oil container below the oil fill hole level.
-- Allow the excess oil to flow back into the oil container and close the valve on the :VAS6291A .
-- Remove the hose and remove the :VAS6291A .
-- If necessary, let the excess oil flow out until it only drips.
-- Re-install the previously removed elbow piece on the :VAS6291A and secure it with a hose clamp.
- The oil level is OK if it is up to the lower edge of the oil fill hole.
-- Install the new oil filler plug -arrow- and tighten it to the tightening specification.
| Tightening specification | Nm |
|---|---|
| Oil filler plug | 14 ±3 |
Check the specified temperature range while checking the oil level, if while filling an oil temperature between 20 °C to 40 °C (68 °F to 104 °F) cannot be guaranteed.
The oil temperature can be measured using the :VAS6519 .
If the oil temperature is not between 20 °C to 40 °C (68 °F to 104 °F), either drive the vehicle to warm it up or let the oil temperature cool down.
| Oil Capacities and Oil Specifications | |
|---|---|
| Front axle-differential lock oil capacity GTI | Refer to FLUID CAPACITY TABLES - 2015 , FLUID CAPACITY TABLES - 2016FLUID CAPACITY TABLES - 2017 . |
| Oil specification | Refer to FLUID CAPACITY TABLES - 2015 , FLUID CAPACITY TABLES - 2016FLUID CAPACITY TABLES - 2017 . |