Sequence/Brake Fluid Quantity
| Bleeder Valve Sequence: | Brake Fluid Amount That Must Flow Out Of The Bleeder Valves: | |
|---|---|---|
| LHD | RHD | |
| Brake caliper | ||
| Left front | 0.20 liter | 0.4 liter |
| Right front | 0.20 liter | 0.4 liter |
| Brake cylinder/brake caliper | ||
| Left rear | 0.30 liter | 0.6 liter |
| Right rear | 0.30 liter | 0.6 liter |
| Clutch slave cylinder | 0.15 liter | 0.15 liter |
| Total quantity for automatic transmission including the extracted quantity from the brake fluid reservoir | Approximately 1.00 liters | Approximately 2.00 liters |
| Total quantity for manual transmission including the extracted quantity from the brake fluid reservoir | Approximately 1.15 liters | Approximately 2.15 liters |
Sequence/Brake Fluid Quantity
-- After completing the bleeding procedure press the clutch pedal several times.
-- Install the air filter housing in reverse order of removal.
-- Move filler lever on :VAS5234 to position "B" (see operating instructions).
-- Remove the filler hose from the adapter.
-- Remove the adapter from the brake fluid reservoir.
-- Check the brake fluid level and correct if necessary. It must be between -1- and -2-.
-- Screw on the brake fluid reservoir cap -1-.
-- If necessary, install the rear wheels. Refer to WHEEL BOLTS, TIGHTENING TO SPECIFICATION .
-- Perform a function test during the test drive.