Parking Aid Control Module -J446- /Parallel Parking Assistance Control Module -J791- BRACKET, REMOVING AND INSTALLING: Removing
-- Turn off the ignition and all electrical equipment.
-- Remove the ignition key, if equipped.
-- If equipped: remove the Parking Aid Control Module -J446- /Parallel Parking Assistance Control Module -J791-. Refer to PARKING AID CONTROL MODULE -J446-, REMOVING AND INSTALLING .
-- To loosen the retainers, insert a 0.9 mm feeler gauge -2- behind the opening -arrow- as illustrated.
-- Remove the bracket -1- from below from the Vehicle Electrical System Control Module -J519- -3- bracket.