Overview - Battery

Fig 1: Exploded View Of Battery

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bracket
Bolt
- 15 Nm
Nut
- 6 Nm
Positive Cable
- With battery terminal
- Disconnecting and connecting. Refer to BATTERY, DISCONNECTING AND CONNECTING .
Cap
- For positive wire
Heat Shield
Cover
- For positive terminal
Cover
- For negative terminal
Connector
- For Battery Monitoring Control Module -J367-
- Follow the sequence when connecting the ground cable. Refer to BATTERY, DISCONNECTING AND CONNECTING .
Nut
- 9 Nm.
Ground Wire
Nut
- 20 Nm
Ground Wire
- With battery terminal and Battery Monitoring Control Module -J367-
- Removing and installing. Refer to GROUND CABLE WITH Battery Monitoring Control Module -J367-, REMOVING AND INSTALLING .
- Disconnecting and connecting. Refer to BATTERY, DISCONNECTING AND CONNECTING .
- Adapt the Battery Monitoring Control Module -J367-. Refer to Battery Monitoring Control Module -J367-, ADAPTING
Battery -A-
- Removing and installing. Refer to BATTERY, REMOVING AND INSTALLING .
- Disconnecting and connecting. Refer to BATTERY, DISCONNECTING AND CONNECTING .
- Replacing on a vehicle with the Start/Stop System Vehicles with Start/Stop System
Battery Tray
- Removing and installing. Refer to BATTERY TRAY, REMOVING AND INSTALLING .
Nut
- 9 Nm.
Bolt
- 9 Nm.
- Quantity: 3