Removal And Installation: Strut: Installing

-- Secure strut to body, tighten bolt -arrow- to do this.

Fig 1: Identifying Plenum Chamber Bolt

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the bolt -2- and tighten.

Fig 2: Identifying Strut And Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten bolts -1- for strut -3-.

-- Install the steering column. Refer to Installing .

-- Install plenum chamber bulkhead. Refer to Plenum Chamber Bulkhead Overview .

-- Perform basic setting on the Steering Angle Sensor -G85- using the Vehicle Diagnostic Tester.

Tightening Specifications