Overview - Ignition System
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
- Knock Sensor 1 -G61-
- On the front cylinder head under the intake manifold
- Removing and installing, refer to Knock Sensor 1 -G61- .
- Contacts gold plated
- Bolt
- 20 Nm
- The tightening specification influences the function of the knock sensor.
- Ignition Coils 1 through 4 with Power Output Stage -(N70, N127, N291, N292)-
- Spark Plug
- 25 Nm
- Type and Electrode Gap, refer to TEST DATA AND SPARK PLUGS .
- Remove and install using the Spark Plug Removal Tool 3122B
- O-Ring
- Engine Speed Sensor -G28-
- In the front, lower, left in the cylinder block, next to the oil separator, refer to Fig 2
- Removing and installing, refer to Engine Speed Sensor -G28- .
- Bolt
- Camshaft Position Sensor -G40-
- In the front cylinder head cover
- Contacts gold plated
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.