Selector Mechanism Overview

Fig 1: Identifying Selector Mechanism Components Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Selector Lever Handle
- With selector lever boot and cover
- Do not remove the handle unnecessarily.
- Only the cover needs to be unclipped for emergency release. Refer to EMERGENCY RELEASE FROM P (PARK POSITION)
- Removing and installing. Refer to SELECTOR LEVER HANDLE .
- Refer to BUTTON IN HANDLE, MOVING INTO INSTALLATION POSITION .
Clamp
- Replace after removing
- For fastening the handle on the selector lever
- Attach using Hose Clip Pliers VAG 1275A
Selector Mechanism with Selector Lever Cable
- with integrated Selector Lever Sensor System Control Module -J587- with Selector Lever -E313-, Tiptronic Switch -F189-, Selector Lever Park Position Lock Switch -F319- and Selector Lever Solenoid -N110-
- Selector lever cable can only be replaced together with the selector mechanism
- Removing and installing. Refer to SELECTOR MECHANISM .
- Do not grease the selector lever cable.
- Check the selector mechanism. Refer to GEARSHIFT MECHANISM, CHECKING
- Selector Lever Cable, Checking and Adjusting, refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING
Bolt
- 8 Nm
Nut with Collar
- 8 Nm
- Quantity: 4
Selector Housing
- Available only together with the selector mechanism.
Bracket
- For selector lever cable
Selector Lever Cable
- Must not be removed from the selector mechanism and is replaced together as a single component.
Transmission
Tunnel/Body