Multifunction Transmission Range Switch -F125-, ADJUSTING: Adjusting

-- Place the Gauge - Multi Function Switch T10173 on the selector shaft -2- and turn the Multifunction Transmission Range Switch -F125- -1- until the Gauge - Multi Function Switch T10173 locks into the tab on the Multifunction Transmission Range Switch -F125- connector.

Fig 1: Adjustment Tool Attached Onto Shift Rod

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE: If the tab on the connector does not engage in the Gauge - Multi Function Switch T10173 groove, then the transmission is no longer in "N". In this case, shift the transmission into "N" using the Gauge - Multi Function Switch T10173.

-- Secure the Gauge - Multi Function Switch T10173 to the selector shaft -2- with the screw -3-.

-- Tighten the bolts -arrows- to the tightening specification.

-- Remove the Gauge - Multi Function Switch T10173.

-- Further installation is performed in the reverse sequence. Refer to Multifunction Transmission Range Switch -F125- .