Vehicle Electrical System Control Module -J519-, REMOVING AND INSTALLING: Removing

-- Remove the footwell cover on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

-- Remove the lower A-pillar trim panel. Refer to A-PILLAR TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the foot rest. Refer to FOOTREST, REMOVING AND INSTALLING .

-- Disconnect the connectors -1, 2 and 3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- To disconnect the connector press the tab -1-.

Fig 1: Pressing Catch -1-, Turn Retaining Bracket In -Direction Of Arrow For Removal

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pivot the retaining bracket in direction of -arrow- and remove the connector.

-- Release the springs -arrow-, pivot the vehicle electrical system control module -4- out of the bracket -5- and remove downward.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.